China Poly-Chain Gt8m Synchronized Sprocket for 36mm Belt chain sprocket

Product Description

CZPT Equipment gives a wide range of large high quality Timing Belt Pulleys and Toothed Bars/ Timing Bars.  Standard and non-regular pulleys according to drawings are accessible .

 
Sorts of substance:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Metal Timing Pulley
  3. GG25 HT250 Forged Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
  5. Other substance on desire, this sort of as cooper, bronze and plastic
 
Sorts of floor treatment method
 1.  Anodized surface area -Aluminum Pulleys
 2.  Hard anodized surface — Aluminum Pulleys
 3.  Black Oxidized surface — Steel Pulleys
 4. Zinc plated area — Steel Pulleys
 5. Chromate area — Steel Pulleys Forged Iron Pulleys
 6. Nickel plated surface area –Metal Pulleys Forged Iron Pulleys
 
Kinds of teeth profile

Tooth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(2.032MM)
XL 1/5″(5.08MM)
L three/8″(9.525MM)
H 1/2″(12.7MM)
XH seven/8″(22.225MM)
XXH one 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Kinds of pitches and sizes

Imperial Inch Timing Belt Pulley,
one.     Pilot Bore MXL571 for 6.35mm timing belt tooth quantity from 16 to 72
two.  Pilot Bore XL037 for 9.53mm timing belt tooth quantity from 10 to seventy two
3.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt enamel number from ten to a hundred and twenty
four.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt enamel quantity from 10 to a hundred and twenty
five.  Pilot Bore, Taper Bore L100 for twenty five.4mm timing belt teeth number from 10 to one hundred twenty
6.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt tooth quantity from 14 to 50
7.  Pilot Bore, Taper Bore H100 for twenty five.4mm timing belt tooth variety from fourteen to 156
eight.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt teeth number from 14 to 156
nine.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt teeth amount from 14 to 156
ten.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt enamel variety from fourteen to 156
eleven.  Taper Bore XH200 for 50.8mm timing belt teeth amount from eighteen to one hundred twenty
twelve.  Taper Bore XH300 for seventy six.2mm timing belt enamel number from 18 to one hundred twenty
13.  Taper Bore XH400 for a hundred and one.6mm timing belt enamel variety from eighteen to 120

Metric Timing Belt Pulley T and AT
one.  Pilot Bore T2.5-16 for 6mm timing belt teeth amount from 12 to 60 
two.   Pilot Bore T5-21 for 10mm timing belt teeth amount from 10 to 60 
three.   Pilot Bore T5-27 for 16mm timing belt tooth number from ten to 60 
4.   Pilot Bore T5-36 for 25mm timing belt enamel variety from ten to 60 
five.   Pilot Bore T10-31 for 16mm timing belt tooth amount from 12 to 60 
6.   Pilot Bore T10-40 for 25mm timing belt enamel amount from twelve to 60 
7.   Pilot Bore T10-47 for 32mm timing belt teeth number from eighteen to 60 
eight.   Pilot Bore T10-66 for 50mm timing belt tooth amount from eighteen to 60
nine.  Pilot Bore AT5-21 for 10mm timing belt tooth variety from 12 to sixty
ten. Pilot Bore AT5-27 for 16mm timing belt enamel quantity from 12 to sixty
11. Pilot Bore AT5-36 for 25mm timing belt teeth number from twelve to 60 
12. Pilot Bore AT10-31 for 16mm timing belt enamel variety from 15 to 60 
13. Pilot Bore AT10-40 for 25mm timing belt teeth quantity from fifteen to 60 
14. Pilot Bore AT10-47 for 32mm timing belt enamel number from eighteen to 60 
15. Pilot Bore AT10-66 for 50mm timing belt tooth variety from eighteen to sixty
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
one.  HTD3M-06 3M-09 3M-15 tooth variety from 10 to 72 
2.  HTD5M-09 5M-15 5M-twenty five teeth number from twelve to 72 
three.  HTD8M-20 8M-thirty 8M-fifty 8M-85 tooth number from 22 to 192 
4.  HTD14M-40 14M-fifty five 14M-eighty five 14M-one hundred fifteen 14M-one hundred seventy teeth variety from 28-216 
5.  Taper Bore HTD5M-fifteen 8M-20 8M-30 8M-50 8M-85 14M-40 14M-fifty five 14M-85
         14M-one hundred fifteen 14M-a hundred and seventy

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-twelve PCGT8M-21 PCGT8M-36 PCGT8M-62 
2.      PCGT14M-twenty PCGT14M-37 PCGT14M-sixty eight PCGT14M-ninety PCGT14M-one hundred twenty five

Electrical power Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
one. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
two. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
three. 5GT-15, 5GT-twenty five for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06 3M-09 3M-15 tooth quantity from 10 to 72 
two.   RPP5M-09 5M-fifteen 5M-twenty five enamel amount from twelve to 72 
three.   RPP8M-20 8M-thirty 8M-50 8M-eighty five enamel variety from 22 to 192 
four.   RPP14M-40 14M-55 14M-eighty five 14M-115 14M-170 teeth variety from 28-216 
five.  Taper Bore RPP5M-15 8M-twenty 8M-30 8M-50 8M-85 14M-40 14M-fifty five 14M-eighty five
     14M-a hundred and fifteen 14M-a hundred and seventy

US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Soft Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Steel

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M
US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Soft Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Steel

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.
sprocket

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
sprocket

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
sprocket

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China Poly-Chain Gt8m Synchronized Sprocket for 36mm Belt     chain sprocketChina Poly-Chain Gt8m Synchronized Sprocket for 36mm Belt     chain sprocket
editor by czh 2022-12-06

Cast Iron Sprocket

As one of the leading cast iron sprocket manufacturers, suppliers, and exporters of mechanical products, We offer cast iron sprockets and many other products.

Please contact us for details.

Manufacturer supplier exporter of cast iron sprockets.

Recent Posts