Product Description
Specification:
| Â | |||
| Regular: | IEC60034 | ||
| Body Measurement: | H80-H355 | ||
| Power: | .seventy five-300KW | ||
| Rated Voltage: | 380V,400V,415V | ||
| Rated Frequency: | 50HZ,60HZ | ||
| Poles: | four | ||
| Speed: | a thousand-300r/min | ||
| Current: | one.5-40A | ||
| Effectiveness Course: | IE2 | ||
| Insulation Course: | F | ||
| Protection Course: | IP54 IP55 | ||
| Cooling Strategy: | IC411 | ||
| Ambient Temperature: | -15°C-+40ºC | ||
| Mounting: | B3,B35 | ||
| Responsibility: | S1 | ||
| Body Content: | Solid Iron/Aluminum | ||
| Terminal Box: | Prime or Aspect | ||
| Altitute: | ≤1000m | ||
| Certification: | CE 3C ISO9001Â | ||
Description:
The prolong shaft motor adopts the style technologyand is produced of warmth-resistant insulating components. It can make sure the protected operation of the motor in high-temperature enviroment CZPT aging and burning. Its motor functionality is created according to the qualities of supporter and pumb load, which can preserve vitality and adopt strengthened insulation to make certain reputable insulation and increase provider life.
Bulletins:
one.Remember to affirm regardless of whether the physical appearance of the motro is destroyed ahead of ues? Is there any oil leakage?
two.Remember to confirm the voltage of the motor. Voltage regulator can be mounted whne voltage is unstable.
3.Make sure you validate no matter whether the speciation of the motor bought is regular with the layout specification.
four.You should make positive that the frame is mounted to stay away from loosening during procedure.
5.If sprocket, pulley,coupling are employed and other components need to be installed according to appropriate regulation.
6.The lubricating grease has been set into the entire body of the decelerating motor, and the lubricating oil can not be modified for 12000 several hours.
7.When the motor is running, the rated current shall not CZPT the current worth indicated on the motor nameplate.
8.You should shell out focus to the surrounding temperature, humidity, pH and other problems.
9.If it is not put in or operated in the correct way, it may possibly cause severe damage to the motor.
ten.For the duration of servicing or disassembly, it is essential to verify that the exterior energy supply is entirely folded absent from the motor.
11.The security safety device should be set up to ensure the protection of operation.
twelve.The motor requirements grounding wire, remember to refer to relevant energy distribution.
thirteen.Make sure you validate that all set up areas and transmission equipment are set correctly beforestarting the deceleration motor.
fourteen.If the motor is pushed with frequency converter at lower velocity, it is necessary to set up the auxiliary CZPT supporter.
15.Make sure you tell the complex office of our factory when the motor is put in vertically.
Â
Drum sprockets: These sprockets are usually wider to improve the general surface make contact with amongst the sprocket and chain. This decreases pressure on the two sections, creating a more resilient method for heavy haul conveyors.
Above time, the sprocket tooth wear out because of to friction induced by the consistent bodily contact amongst the sprocket teeth and the sprocket. ep manufactures wise tooth sprockets with put on indicator pins. These visible use indicators inform operators and inspectors when sprockets are still functioning safely and securely and when they need to have to be replaced.
