Product Description
Starshine Drive Cycloid Geared Motor Attributes
one. Features:
one. Smooth operating,low sounds gear tooth needle a lot more engagement.
2. Cycloidal tooth profile gives a large contact ratio to face up to overload shocks
three. Compact dimensions: solitary ratio accessible from 1/9 to 1/87, double stage up from 1/ninety nine to 1/7569
four. Excellent for dynamic applications: repeated start-quit-reversing obligations satisfies for cyclo pace reducer because inertia is low
5. Decrease routine maintenance expenses: large reliability, extended lifestyle, minimum upkeep in comparison to conventional gearboxes
six. Interior areas replaceable with other manufacturers to make sure managing.
7. Grease Lubricated & Oil Lubricated Designs Available
8. Output Shaft Rotation Course: Solitary Reduction: Clockwise Rotation Double Reduction→ Counter Clockwise Rotation
nine. Ambient Circumstances: Indoor Set up:10-40 Celsius, Max 85% Humidity, Beneath 1000m Altitude, Nicely Ventilated Atmosphere, Free of corrosive, explosive gases, vapors and dust
ten.Sluggish Pace Shaft Route: Horizontal, Vertical Up & Down, Common Path
11.Mounting Fashion: Foot Mount, Flange Mount & Vertical F-flange Mount,
twelve. Enter Relationship: Cyclo Integral Motor, Hollow Input Shaft Adapter
13. CZPT Method With Driven Equipment: Coupling, Gears, Chain Sprocket Or Belt
fourteen. Cycloid reducer Potential Selection: .37kW ~ 11kW
2. Specialized parameters
| Type | Old Type | Output Torque | Output Shaft Dia. |
| SXJ00 | JXJ00 | 98N.m | φ30 |
| SXJ01 | JXJ01 | 221N.m | φ35 |
| SXJ02 | JXJ02 | 448N.m | φ45 |
| SXJ03 | JXJ03 | 986N.m | φ55 |
| SXJ04 | JXJ04 | 1504N.m | φ70 |
| SXJ05 | JXJ05 | 3051N.m | φ90 |
| SXJ06 | JXJ06 | 5608N.m | φ100 |
About Us
ZheJiang Starshine Drive Co.,Ltd,the predecessor was a point out-owned military CZPT enterprise, was established in 1965. Starshine specializes in the complete power transmission solution for higher-conclude gear production industries dependent on the purpose of “System Merchandise, Application Design and style and Specialist Service”.
Starshine have a powerful complex drive with above 350 personnel at current, including above thirty engineering professionals, thirty top quality inspectors, masking an location of 80000 square meters and varieties of superior processing equipment and tests equipments. We have a excellent basis for the industry software development and support of higher-finish velocity reducers & variators owning to the provincial engineering technology analysis centre,the lab of gear speed reducers, and the base of CZPT R&D.
Our Team
Good quality Manage
Good quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.
four. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
six. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
solution is a product inspection to determine the qualified products.
seven. Certification.
Packing
Shipping
Sprockets are manufactured to ISO606 and ASME B29.100 standards, obtainable in plate, one and double hub configurations, created from high high quality carbon steel, optional tapered bushings simplify installation and removal, treatments offered on request, such as black oxide
Bushing Sprockets: Bushing sprockets can simplify chain system maintenance by replacing only worn sprocket assemblies, even though the bushings can still be reused. The bushing also has a tightly tapered mating floor that can transmit larger torques than straightforward essential elements. Near-fitting surfaces give far better functionality in purposes with hefty start/quit functions or shock loads.
